MUL can be installed over:
• Gypsum underlayments
• Residual adhesives (non sticky)
• Painted subfloors
• Existing fully adhered floors
• Oriented strand board
• Flake board
• Particleboard
• Existing ceramic tile (grouts must be leveled)
• Concrete (all grade levels)
• Existing resilient vinyl floor
The Adura/MUL system is a floating floor. Do NOT install cabinets, islands or any permanent fixtures on top.
• MUL creates a floating floor. Do not fasten or glue moldings through the finished flooring to the substrate..
• For Adura repair/replacement, lightly heat the surface and gently peel away from the MUL. If the MUL is torn during this
process, it will need to be replaced as well.
SPECS - ORDER ENTRY/MACS TRANSMISSION
• Description: 33 mil overall thickness
• Width: 6’
• Installation: Loose lay only/vinyl side down
• Backing: VN
• Tape: 2” Clear, thin packaging tape
• Roll Size: 6’ roll = 85 sq.yds.
6’ large roll = 170 sq.yds
